AuCo Solutions
Prodaction of frames from 10 x 10 cm to 100 x 120 cm.

Prodaction of frames from 10 x 10 cm to 100 x 120 cm. (aucosolutions.com ...)

Linkedin share button

Chiodatele: automatic assembling machine


Chiodatele is an automatic assembling machine, it doesn't require the presence of an operator.
The Chiodatele machine cut the canvas and fix on frame creating perfect canvas painting for painter.

The average production cycle of Chiodatele assembling machine is up to 180 complete frames per hour.
The Chiodatele machine can operate 24 hours a day.
At the beginning of production with the Chiodatele automatic assembling machine, it is only necessary to set the machine to the frame size.
This operation will only take few minutes.

Assembling the canvas painting


The Chiodatele machine is capable to assemble canvas on frames ranging from 10 x 10 cm. to 100 x 120 cm.

The Chiodatele automatic machine automatically loads one frame at the time, shut properly, squared at right angles.
The assembling machine cut the canvas to fit perfectly the frame.

The Auco Solutions software checks that every single nail is correctly fastened to the frame.
The nails' speed is of 4 nails every second.
The Chiodatele automatic assembling machine satck the finished frames in the output container.
Some stops are needed only to load and unload the stack of finished canvas painting.

Pneumatic and brushless movements of the Chiodatele automatic assembling machine


All the automatic movements of Chiodatele assembling machine are made with brush-less motors and pneumatic pistons, and there is very little noise.
The HMI SCADA control OF Chiodatele display shows the alarms.
The automatic software calculate the preventive maintenance showing what do and when do.
The network connextion enables remote assistance from Auco Solutions for the Chiodatele assembling machine.


The cutting system of Chiodatele use a controlled pressure of the cutter and a right angle on the canvas to obtain a perfect cutting of the canvas.


The frame is olded in the Chiodatele with a modular solution (patend registred) that with a simple setting allow to old frame from 10 x 10 cm to 120 x 120 cm.

A second patent protect the special Chiodatele solution to old the canvas with a perfectly distribuited pressure on the olding line.


Share on your network for don't lost contact with us
Linkedin share button

Technology


•    GE Automation programmable logic controller (PLC) GE Fanuc 9030 and PACSystems RX3i 330

•    Brushless motors (Wikipedia)

•    Custom System AuCo Solutions

References


•    Auco Italia (Italy)


Crushing plant of aggregate production
Oven Software
Waterproofing
Dams Monitoring: automation software for green energy and safety
Logistics
Metal Heat Treating
Metal Melting
Hardware virus protection
Turbine
Routine Test Certificate
Automotive High-Speed Train: test of electronic equipment
Electric Motors Test
Environmental Test Chambers
Fire Protection: industrial software automation
Biogas: renewable green electric energy production
Testing Machine MCS7001
By using this site you agree to our use of cookies as describe in our cookies policy Cookies & Privacy